Some common issues of house painting that are generally faced have been discussed in this article Pro Painters Melbourne. The causes and remedy have also been explained.

Are you facing problems with the home painting and want to get it done again by some domestic painters? It is a good idea to get your home re-painted as you are facing problems, but how would you guarantee that the problems that you are facing now would not crop up again? This is possible only if you understand the painting problems that you are now facing and know the causes so that you can be alert next time to see that the work is done properly. Most of the problems occur due to faulty painting job done by the contractors. So, knowing the causes could help you to take precautionary measures that can prevent recurrence.

Blistering

One of the most common home painting issues that people encounter is that of blistering. Small bubbles or blisters are formed on the painted surface at various places. This happens when the paint loses its stickiness or the property of adhesion, making it lift from the surface and forming bubble like blisters. The cause of blistering is improper application of paint. The paint has been applied on a surface that had not been properly dried that might have been damp or wet. When repainting the surface, ensure that the surface is properly dried before painting and get rid of the source of dampness if it happens to be creeping from adjoining areas.

Peeling

Peeling away of paint from the surface is experienced by many people. Once again, the cause of the problem is improper surface preparation. Either the surface was dirty on which the paint was applied or it was damp and wet. Paint peeling can also happen if the wall has been repainted without removing the earlier coat of paint. One of the best ways to ensure that peeling does not happen is to properly prime the surface that has to be painted. This means the surface has to be made smooth by sanding and about one square foot area surrounding the spot where peeling has happened has to be scraped thoroughly for removing the earlier paint. The source of the dampness has to be identified so that preventive action can be taken.

Mildew

A health hazard and a painting problem commonly seen in homes is the formation of fungi on the painted surface known as mildew. This particularly happens at places that are dark and do not get sunlight or in damp conditions. Underprepared surfaces that have not been properly primed and using inferior quality latex paints are the other reasons for mildew. Scrubbing the surface with a bleach solution and using primers that are resistant to mildew can help to overcome the problem.

Wrinkling

Wrinkling can be best understood if you find that there is a crinkled surface appearing on the walls. This happens when the paint forms a skin and makes the surface wrinkle. There may be two reasons for wrinkling. If the humidity is high then the under layers of the paint do not dry as fast as the upper layers or the coat of paint that has been applied is too thick. The remedy is to remove the wrinkled layer of paint and do it again. But, the first layers of paint or primer has to be completely dried before applying the next coat.

Paying attention to the quality of surface preparation by domestic painters Melbourne would ensure that you do not encounter these problems.